July 23, 2017

HEALTH & WELLNESS: Tree stand safety tips for hunters

Vermont Fish & Wildlife reminds hunters to take safety precautions when using tree stands. (Observer courtesy photo)

Vermont Fish & Wildlife reminds hunters to take safety precautions when using tree stands. (Observer courtesy photo)

Early hunting season is already underway in Vermont, and the main season is not far away. Early black bear season has begun, archery deer and archery turkey seasons begin Oct. 5. Archery moose season started Oct. 1 and regular moose season begins Oct. 19. Falls from tree stands are a major cause of injury among hunters. Vermont Fish & Wildlife urges hunters to follow some safety tips when using tree stands.

  • Choose a live, straight tree.
  • Buy smart. Only use stands certified by the Treestand Manufacturers Association (TMA).
  • Inspect them each time you use them.
  • Know the rules. On state lands, it is illegal to place nails or other hardware into trees or to build permanent structures. On private lands, you must have landowner permission to erect a tree stand, cut or remove trees or other plants, or to cut limbs. All stands, including ground blinds, must be marked with the owner’s name and address.
  • Always wear a full-body safety harness, even for climbing. Most falls occur going up and down the tree and getting in and out of the stand.
  • Don’t go too high. The higher you go, the vital zone on a deer decreases, while the likelihood of a serious injury increases.
  • Never carry firearms or bows up and down trees. Always use a haul line to raise and lower all gear. Make sure your firearm is unloaded.
  • Familiarize yourself with your gear before you go. The morning of opening day is a poor time to put your safety belt on for the first time.
  • Be careful with long-term placement. Exposure can damage straps, ropes and attachment cords. Also, the stand’s stability can be compromised over time, as the tree grows.
  • Hunt smart. Hunt safe. Wear orange.

Comments

  1. tcoletta says:

    almost 3 decades ago when williston started it’s development review process the public works section was pushing for a wider roadway typical for residential streets. The town adopted 30 ft widths vs 24ft. That’s 6/24 (30%) additional impervious area and runoff that needs to treated before flowing into ALLEN BROOK. The town and selectboard have indicated a lack of interest to reach out and help communties like mine that have had expired stormwater permits for more then a decade. Its always been a wait and see, well I see where this headed now.

Speak Your Mind